Wednesday, April 25, 2007
815 Transmitter Coil/L1
L1 of my transmitter calls for ten turns on a 1" coil form spaced over 7/8". I had the form and the wire I needed. Winding spaced turns, though, takes a trick. I first wound the ten turn coil on the form, tightening the wire as much as possible. The turns were not even. It was not pretty. I then wound another "coil" (the red wire) forcing evenything to space out evenly over the 7/8". This I heavily coated with clear fingernail polish. After the fingernail polish had dryed I removed the red spacer coil and recoated with fingernail polish.